Your position: Home > Operation room equipment > Gynecology bed

MY-I017C Hoapital Electric Parturtion bed

delivery and ordinary obstetric and gynecological operations .
Item Code: MY-I017C
Sold: 0
    Please select the information you wantX
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Unit/Units 50 in Stock
  • Description
Specifications
1、Main Usage & Structure
a)Usage: The product is designed for delivery and ordinary obstetric and gynecological operations .
b)The appearance of this produce looks smooth , suitable to all different positions of patients. Electric adjustments can meet the requirement of total tilting. To adjust the heights according to use different trendelenburg and reversed trendelenburg.  Applicable in obstetrics and gynecological department, surgical, urine surgical department of hospital.
 
2、Specifications
Dimension of the bed /surface
Overall Length…………………………………………………………1250±50mm
Width………………………………………………………………………520±20mm
Height
Max Height of table top :…………………………………………………1200mm
Min Height of table top :……………………………………………………480mm
Height of seating plate :…………………………………………………520mm
Adjusting Scope of Tabletop
Reversed Trendelenburg ……………………………………………………≥20°
Trendelenburg ………………………………………………………………≥5°
Lifting speed………………………………………………………10±5mm/s 
Safe Working Load…………………………………………………………………135kg
Supply AC220±10%,50Hz±1Hz
Internal electric source:DC24V  Battery capacity ≥ 2.4AH
Device safety sortI  B
Ingress ProtectionIPX4
   

3Structure of Obstetric Bed
1The Obstetric bed is made of mechanical and electrical systems.
2The mechanism system is made of frame, tabletop , handle, leg support, tray and accessories. And the electrical system is made of built-in controlling and transferring system and remote controller.

4Usage instruction:
1. The electrical adjustments of the obstetric bed meet the requirement of total tilting of the bed. The height adjustments are reached by means of controlling trendelenburg and reversed trendelenburg. Remote controller is equipped to control different movements. The movement stops when the button is released. Foot controller is also available .
2The mattress and cover is made of foams covered by high quality leather, antistatic and detachable, and disinfection.
3The drain tray is equipped beneath the table , convenient to pull out and push in to deal with sewage and dirty water.
4The supporting table is equipped beneath the table, convenient to pull out and push in to make the operations.
5Leg support can be moveable ,swiveling , adjustment and easy to lock.
6The circuit map can be offered according to customers requirement.
7This product is equipped with emergency power supply, and emergency power is lead-acid battery which you can automatically charge, When net power is off , the emergency power source can automatically jump to working condition. Emergency power has charging light. When the green light is bright, it means it is charging. After the power is sufficient, light turns off.
 
5、Accessories
Numberal order Name of accessories Number
1 Handle 2
2 Cushion 1
3 Contaminative Basin 1
4 Foot board 2
6、Cautions
1 Before using the parturtion bed, lock all handles tightlyso as to prevent them from loosing or sliding off while used.
2  The parturtion bed can electrically operate 8 movements. These movements must be operated separately. Attention: the product is supplied by single-phase alternating current (220V, 50Hz), tri-socket .Fuse plug rating is 2A ,.Please carefully inspect socket to insure
reliable earth; shut off power while stop perform. When trouble happen please inform company /agency to assign engineer overhaul, dont overhaul by yourself.
3 Every time, after the operation, clean the dirt on the table and keep it clean, make the table top be in the horizontal position and descend the kidney bridge.
4 Keep the button container dry and clean to avoid current leakage. Keep it in the proper place after being used.
5 Dont step on the current mains or controlling mains to avoid breaking the connecting joints or damaging the insulation coat of the wire.
6 Put the parturtion bed in dry place to avoid the electric controlling devices being wet and being damaged.
7 It must be repaired and kept clean regularly, once every year.
8 The replacement parts during Electric parturtion bed’ normal using period, has been confirmed scrapped (unable to use), should be handled according to the classification (recyclable and non-recovery).
9 The service life for Electric parturtion bed is seven years. If it is used in expired period, it maybe led to wearing and corrosion of some mechanical parts, and had a negative influence upon the mechanical intensity. The patients maybe suffered. So the parturtion bed should be used in the regular maintenance and during safety using period.
10 Electric parturtion bed must be used on the antistatic ground.
11 Voltage : 24V emergency power supply, battery capacity ≥ 2.4AH. Emergency power inspection must be operated every six months. The battery should be replaced once a year. If the external protective conductor in the installation or the integrity of the wiring is in doubt, equipment should be supplied to run by the internal power.
12 Please pay attention not to make the metal contact with rechargeable batteries, prevent battery from exposing to high heat, and not to throw the scrapped batteries into the fire.
 
Warning: electric parturtion bed coupled with high-frequency surgical equipment for use, it is possible for the operator and patients to be burned.
 
7Cleaning, disinfection and sterilization
7.1Washing the parturtion bed with water is prohibited.
7.2Clean parturtion bed with a soft cloth, sponge, wet cloth or detergent. Not use a hard brush, steel wire brush, decontamination powder, paint, ether, bananas water, acid-base solution to any surface.
7.3Mattress must be disinfection with alcohol, ether, ultraviolet disinfection and so on (abandoning high-temperature disinfection).

8Environmental  conditions
 Transportation  and stockpile conditions
  a)Environmental temperature-40+55
b)Relative humidity80%
        c) Atmospheric pressure50kPa106.0kPa
Moving Environmental conditions
        a) Environmental temperature5℃~40
        b) Relative humidity70%
        c)Atmospheric pressure70.0kPa106.0kPa
        d) Supply voltage AC220V±22V50Hz±1Hz
 

This device in package should be stored indoor with a relative humidity less than 80%, no erosive air and good ventilation is required. No side-sloping.
It can be shipped in regular transportation without crash, oscillation, rain or direct sunlight.
Customer Reviews
Average rating:

Share your thoughts with other customers